Role Synopsis
- This role covers Workover Rig operations as operational requirements dictate
- The WSL reports to Workover Team Leader, who in turn reports to the Workover Superintendent
- The WSL is responsible for the implementation of the workover programme
- The role of the WSL is to ensure that HSE goals, Operational Integrity,Standards and Well Objectives are not compromised during well operations
- Mentoring of staff is a key role.
Key Roles and Responsibilities
- Active HSE Leadership
- Active monitoring and directing of operations including but not limited to HSE; well control; planning and preparation of upcoming operations; issuing of clear instructions to the rig contractor based on the requirements laid down in the field Standards, the workover programme, discussions with the office and indications from the well; communication with various contractors on and off site; observing, interpreting, understanding and reacting to changes in downhole trends; adequate reporting; good oilfield practices etc
- The WSL will provide mentoring and support to the development of Iraqi staff
- Monitor service providers through formal audit and inspections to promote good HSE & oil field practice
Criteria and Qualifications
- Engineering degree with minimum 5 years’ experience in Workover with an Industry recognised Operator
- Proficient in safe working practices and good oil field practices
- Proven ability to lead workover operations through a theoretical and practical approach
- Ability to understand and work with differing cultures
- Valid Well Control certification, as per client Standards (Level 4 Surface)
- Proven Leadership (HSE and Operational) and Mentoring qualities
- Appendix 1 shows a more detailed description and list of expectations of the WSL position
- The workover operations will be predominantly tubing change out, ESP operations and well integrity repairs
- Must possess valid well control certificate (IWCF or IADC surface stack supervisor)
- Must have good English verbal, written, and listening skills
- Must be able to work effectively as part of a team
- Must be able to work on own initiative; use proactive approach to problem solving and avoidance
- ESP experience would be an asset
- Must Workover wells in a safe, efficient, and effective manner for the field
- Must be able to take responsibility and manage tasks through to completion
- Must adhere to a rigid code of conduct and respect diverse cultural backgrounds and religious beliefs
- Must mentor/coach or contractor staff to follow API and oilfield best practices
- Must review / audit at least one JSA and PTW on a daily basis and ensure that TBTs are actually taking place and, more importantly, are participated in/understood
- Must get engaged in incident investigations
- Must ensure rigs follow the approved standard operating procedures (SOP) for their operations
- Must review SOPs for suitability / completeness and identify gaps and work with various entities to improve Workover contractor operations
- Must conduct well control (and other) audits
- Must review and close out write-ups on the Corrective-Action Registers (CARs) on the rig while implementing a continuous-improvement program
- Must participate in pre-tour and critical pre-job safety meetings
- Must review and follow / implement the agreed-upon workover program, verifying that approved operational steps are adhered to and promulgated in appropriate plans forward
- Must ensure an MoC is accomplished if operations need to deviate from the agreed-upon workover program or SOP
- Must directly oversee operations that deviate from normal activities, such as running casing tieback/ all cementing operations / all fishing operations / all Acid Stimulation operations / all E-line operations
- Must convey the HSE lessons learned (review incident reports) with assigned rig crews and personnel
- Must participate in ALL drills and offer post-drill constructive criticism, if necessary
- Must verify / witness BOP tests and ensure the BOP testing schedule is adhered to or dispensation is approved
- Must witness all operations involving field equipment, such as wellhead installation and setting and recovering test plugs (BPV’s etc)
- Must verify/ensure all appropriate equipment, personnel, OCTG, supplies are ordered/called off in order to execute the workover program in a timely, competent, coherent fashion
- Must monitor and report ANY well-control event and be prepared to assume on-site senior representative responsibilities
- Must ensure morning reports are well written and accurate and that appropriate well data is input into Landmark OpenWells platform
- Must conduct morning, noon, and night walks around the rig and location looking for safety, environmental, and operational hazards; must intervene, if required
- Must participate in rig STOP card program or equivalent.
- Must participate in the Self-Verification program and encourage his team to fully participate.
- Must conduct periodic job observations and discuss with the rig managers how to correct errant behaviors
- Must ensure rig leadership meetings are occurring on a daily basis and that valid issues/concerns are actioned or addressed
- Must perform operator field authorizations and approvals for all contracted work, as required
- Must possess valid well control certificate (IWCF or IADC surface stack supervisor)
- Must be able to work effectively as part of a team
- Must be able to work on own initiative; use proactive approach to problem solving and avoidance
- Must use initiative to ensure issues are overcome.
- Must have a patient and calm personality
Rotation
- 14 Days On/ 14 Days Off
*Only applicants meeting the strict criteria outlined above will be contacted as part of the shortlisting process.