Banner Job Image

Piping Supervisor

  • Location:

    Basrah

  • Sector:

    Oil & Gas

  • Contact:

    Omid Miri

  • Job ref:

    3042

  • Published:

    over 1 year ago

  • Expiry date:

    2022-10-11

mselect is looking to hire a Piping Supervisor for an international oil & gas operator in Basrah. Candidates must hold a degree in engineering and have a minimum of 5 years of experience in oil and gas projects. English and Arabic fluency is a must.
 
JOB OBJECTIVE
The primary objective is to contribute to the company’s success by ensuring that all phases of Construction work, Pre-commissioning, Commissioning, Piping and pipeline execution work is being done effectively and with minimal hassles. To do this, I will see to it that health, safety, and quality standards are met, and the activities are following company requirements, international codes, standards, and good engineering practices. Well-organized and self-motivated in performing indispensable duties such as regular assessment of construction work for piping and pipeline execution jobs, systems, and prompt intervention to arising problems. Good team player and use own initiative to achieve company objectives. piping and pipelines required to witness, monitor and follow up day-to-day activities on site as per approved project quality plan, inspection and test plan, and approved quality formats to ensure compliance to codes, standards, regulations, specifications and QMS requirements. In case of any deviation, it shall be immediately reported to QA/QC lead and Project manager to close out as per quality requirements.
 
KEY RESPONSIBILITIES
  • Review daily site work and participate in meetings with EPC & Subcontractors to ensure that all relevant activities are being complied with the Company requirements and Project Quality Plan, as required
  • Ensure that controlled copies of all relevant codes and specifications are available at the project and only current documents are in use, in accordance with ‘Master Lists of Documents
  • Ensure on-site implementation of relevant Procedures, Method Statements, QCPs/ ITPs, ITRs, check sheets, and Inspection Reports according to the project specifications and International Codes & Standards
  • Conduct all planned or unplanned work and ensure good housekeeping at the worksites in accordance with established safety procedures
  • Supervise and coordinate activities of workers engaged in setting up, installing, repairing, and maintaining machinery and equipment and in fabricating metal parts and tools
  • Ensure that all piping and pipeline operations and pipe supports installation are in accordance with the schedule, approved Procedures, Specifications, and approved design drawings
  • Supervise daily project site & piping fabrication workshop activities i.e., piping fabrication, Piping and Equipment’s Erection, Steel Structure, PWHT, Cold Bending, Pipeline stringing, piping and pipeline Welding, steel structure welding, Tie-ins, Horizontal Directional Drilling (HDD), Painting, Coating, Trenching, Lowering, Backfilling, Berm Construction, marking and tagging, Installation of Marker & IP posts, Hard Barricading and reinstatement work
  • Review the performance test on blasted surfaces; visual surface cleanliness and contamination test, coating visual inspection, thickness (WFT/DFT), adhesion and discontinuity test
  • Witness/Review the Procedure Qualification Record (PQR) as well as Welder Qualification Test (WQT) as per project specifications and standards, for different materials according to the ASME Sec. IX, B31.3, B31.4, B31.8, API 1104, AWS D1.1 and ISO 13847
  • Review the Mill Test Certificates (MTCs) of all received materials especially piping, pipelines, rotary equipment, and welding consumables to ensure that all piping materials and welding consumables, gases, fluxes, and filler wires meet with the required Codes & Specifications and are in good condition before use
  • Monitor of control storage, handling, braking and issuance of consumables to the welders at the site
  • Reviewing of final handover dossiers as per approved handover dossier index and project specification and providing inputs if any
  • Ensure that all processes/products of non-conformities are highlighted through CAR’S/PAR’S to the QA/QC team for their rectification and follow up
  • Participate with the mechanical completion walk-through team, system-wise and rectified the punch points
  • Monitor/witness the hydrostatic activities for the piping and Flowlines, Transfer-lines e.g., cleaning, pigging, gauging, water filling, thermal stabilization, pressurization, depressurizing, de-watering & flushing, air drying as well as N2 purging at site
  • Monitor/conduct Pre-commissioning activities according to the relevant P&ID e.g., Hydrostatic of Piping & Pipelines, Leak Test, Flushing, Cleaning, Drying, System inserting, Systematic conformity checks of equipment and Box-up
  • Familiar with non-destructive testing examination methods/requirements, fabrication requirements and their procedures
  • Display an awareness of corrosion characteristics and welding processes
 
KEY QUALIFICATIONS
  • Degree in welding engineering or related field
  • Previous experience in welding engineering
  • Solid leadership skills
  • Strong organizational and administrative skills
  • QA/QC-related knowledge
  • Communication Skills
  • Personnel Management Skills
  • Initiative
  • English – Excellent (Spoken & Written)
Experience:
  • Minimum of 5 years in Oil & Gas projects
Computer Skills:
  • MS Office: Excel, Word and PowerPoint – Advanced
  • Any other software as may be available from time to time
 
Rotation:
14 Days on/ 14 Days off
 
 
*Only applicants meeting the strict criteria outlined above will be contacted as part of the shortlisting process.